Please use this identifier to cite or link to this item: http://eir.zntu.edu.ua/handle/123456789/1849
Title: Исследование влияния структурного состояния сплавов на их сопротивляемость абразивному изнашиванию при повышенных температурах
Other Titles: Research of the effect of alloys structural condition on their resistance to abrasive wear under elevated temperatures
Дослідження впливу структурного стану сплавів на їх опірність абразивному зношуванню при підвищених температурах
Authors: Осипов, Михаил Юрьевич
Osipov, Myhaylo Y.
Осіпов, Михайло Юрійович
Keywords: structure
matrix
carbides
abrasive wear
temperature
структура
матриця
карбіди
абразивне зношування
температура
структура
матрица
карбиды
абразивное изнашивание
температура
Issue Date: 2014
Publisher: Хмельницький національний університет
Abstract: UK: Наведено результати досліджень впливу структури сплавів в умовах натурних випробувань при абразівному зношуванні та підвищених (до 500-550 °С) температурах. Встановлено, що в даних умовах зношування основний внесок в підвищення зносостійкості вносить карбідна фаза. Вплив основи сплаву на загальне підвищення зносостійкості, менше, ніж твердої фази. EN: The paper reflects the results of alloys structural condition effect in terms of field tests under abrasive wear and elevated (up to 500-550 °C) temperatures. The tests were performed on mixer scrapers which mix refractory mass for pressing chamotte refracto-ries. Scraper edges were subjected to intense abrasive wear and heated up to 550 °C at the result of friction with the skin of compressed refractory mass. Scraper plates installed at the same place and periodically replaced served as samples. The plates were made of high-speed steel Х12Ф1 and Х12 and then heat-treated to different structural conditions of matrix alloys containing various amounts of carbide phase. It was found that under conditions of abrasive wear and temperatures up to 550 °C the lowest wear re-sistance have the materials with ferritic matrix, while the highest wear resistance have predominantly materials with martensitic condition. Austenitic-martensitic alloys occupy intermediate position in wear resistance scale. It was established that carbide phase plays the most important role in wear resistance improving under such conditions. The test results demonstrate the existence of proportional relation between wear resistance and hardness, while under one type of matrix, - between the wear resistance and the amount of carbide phase. RU: Приведены результаты исследований влияния структуры сплавов в условиях натурных испытаний при абразивном изнашивании и повышенных (до 500-550 °С) температурах. Установлено, что в данных условиях изнашивания основной вклад в повышение износостойкости вносит карбидная фаза. Влияние основы сплава на общее повышение износостойкости, меньше, чем твердой фазы.
Description: Осипов М. Ю. Исследование влияния структурного состояния сплавов на их сопротивляемость абразивному изнашиванию при повышенных температурах / М. Ю. Осипов // Журнал «Проблеми трибології». – 2014. – № 2 (72) – С. 51-57.
URI: http://eir.zntu.edu.ua/handle/123456789/1849
Appears in Collections:Наукові статті кафедри ІТЗ та МК

Files in This Item:
File Description SizeFormat 
Osipov_Research_of_the_effect.pdfНаукова стаття410.32 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.