Influence of technological casting factors on the physical-mechanical properties of high-manganese steel

Abstract

EN: Purpose. Development of a rational technology of the casting process to improve the mechanical and operational properties of castings made of high-manganese steel 110G13L. Research methods. Tensile tests were carried out on a URM-50 machine. Determination of the impact toughness of samples with a U-shaped notch was carried out on a pendulum impactor MK-30A according to DSTU ISO 148-1:2022. Brinell hardness was determined according to DSTU ISO 6506-1:2007. Samples of 110G13L steel for testing were made of two types: from cast bricks measuring 10×10×55 mm3 (thin-walled sample) and cut from ingots measuring 80×80×200 mm3 (thick-walled sample). Results. It was established that the technological factor that increases the physical and mechanical properties of high-manganese steel 110G13L is the wall thickness of the casting and the cooling rate. A high strength index в is achieved on samples from castings with a small cross-section (brick) during accelerated cooling in a metal mold (chill). Thick-walled castings (ingots) leads to a decrease in the relative elongation and narrowing . The impact toughness of steel 110G13L decreases with increasing wall thickness of the casting. Scientific novelty. High dynamic strength and toughness of steel 110G13L is provided by a single-phase austenitic structure. Slow cooling leads to the release of carbides (Fe, Mn)3C outside the grain boundaries. The accumulation of carbides contributes to the propagation of cracks under impact loads, which reduces the impact toughness. Practical value. Thick-walled castings (ingots) worsens the strength characteristics of steel compared to a thin-walled sample (brick). Casting thick-walled castings (ingots) leads to a decrease in the values of relative elongation and narrowing. The impact toughness of cast steel decreases with increasing wall thickness of the casting due to the formation of carbide precipitates. The maximum hardness of cast steel corresponds to a thick-walled casting (ingot) cast in a chill mold. The proposed recommendations will increase the reliability and durability of parts made of high-manganese steel 110G13L. UK: Мета роботи. Розробка раціональної технології процесу лиття для підвищення механічних та експлуатаційних властивостей виливків із високомарганцевої сталі 110Г13Л. Методи дослідження. Випробування на розрив проводили на машині УРМ-50. Визначення ударної в'язкості зразків з U-подібним надрізом проводили на маятниковому копрі МК-30А згідно ДСТУ ISO 148-1:2022. Твердість за Брінеллем визначали згідно ДСТУ ISO 6506-1:2007. Зразки сталі 110Г13Л для випробувань виготовлялися двох видів: з литих брусків розміром 10×10×55 мм3 (тонкостінний зразок) та вирізаних зі зливків розміром 80×80×200 мм3 (товстостінний зразок). Отримані результати. Встановлено, що технологічним фактором, який підвищує фізико-механічні властивості високомарганцевої сталі 110Г13Л, є товщина стінки виливка та швидкість охолодження. Високий показник міцності в досягається на зразках із виливків з малим перетином (брусок) при прискореному охолодженні у металевій формі (кокілі). Лиття товстостінних виливків (зливків) призводить до зменшення відносного подовження та звуження . Ударна в’язкість сталі 110Г13Л зменшується зі збільшенням товщини стінки виливки. Наукова новизна. Висока динамічна міцність та в'язкість сталі 110Г13Л забезпечується однофазною аустенітною структурою. Повільне охолодження призводить до виділення карбідів (Fe, Mn)3C за межами зерен. Накопичення карбідів сприяє поширенню тріщин при ударних навантаженнях, що знижує ударну в’язкість. Практична цінність. Лиття товстостінних виливків (зливків) погіршує характеристики міцності сталі в порівнянні з тонкостінним зразком (бруском). Лиття товстостінних виливків (зливків) призводить до зменшення величин відносного подовження та звуження. Ударна в’язкість литої сталі зменшується зі збільшенням товщини стінки виливка через утворення карбідних виділень. Максимальна твердість литої сталі відповідає товстостінному виливку (зливку), відлитому в кокіль. Запропоновані рекомендації дозволять підвищити надійність та довговічність деталей із високомарганцевої сталі 110Г13Л.

Description

Snizhnoi Gennadii, Sazhnev Volodymyr, Onyshchenko Denys, Snizhna Kristina. Influence of technological casting factors on the physical-mechanical properties of high-manganese steel. Нові матеріали і технології в металургії та машинобудуванні. 2026. № 3. С. 15-22.

Citation