Радіоелектроніка, інформатика, управління - 2012, №2 (27)
Permanent URI for this collectionhttps://eir.zp.edu.ua/handle/123456789/29235
Browse
Recent Submissions
Item Оптимальное робастное широкодиапазонное управление скоростью асинхронного двигателя(Національний університет «Запорізька політехніка», 2012) Потапенко, Евгений Михайлович; Шийка, А. А.; Потапенко, Євгеній Михайлович; Шийка, А. А.; Potapenko, E. M.; Shiyka, A. A.RU: Синтезированы методы оптимизации широкодиапазонного векторного управления скоростью асинхронного двигателя (АД). Методы позволяют при ограниченном напряжении и (или) токе формировать максимально возможный электромагнитный момент АД. Для случая не достижения указанных ограничений и заданного электромагнитного момента разработаны методы синтеза программных токов, минимизирующих потребляемую мощность. Представлена функциональная схема робастного оптимального управления токами статора и дано описание работы системы. UK: Синтезовані методи оптимізації широкодіапазонного векторного керування швидкістю асинхронного двигуна (АД). Методи дозволяють за умови обмеженого струму та (або) напруги формувати максимально можливий електромагнітний момент АД. Для випадку не досягнення вказаних обмежень і заданого електромагнітного момента розроблені методи синтезу програмних струмів, які мінімізують споживану потужність. Наведена функціональна схема робасного оптимального керування струмами статора і надано опис роботи системи. EN: This paper represents a robust voltage regulation algorithm for an induction machines that enable minimization of the losses and maximization of torque capability. The maximum torque of an induction machine is limited by the current and voltage constraints. Depending on rotor speed, current and voltage limits, the algorithm calculates the coupling coefficient of stator currents k, that determines the optimal stator currents (id, iq) for the maximum torque capability in whole values of the rotor speed (under the rotor base speed and in the field-weakening region). If those limits are not reached, the algorithm calculates optimal stator currents for minimization of losses of an induction machine. The block diagram of robust optimal voltage regulator is represented. The validity of proposed algorithm is demonstrated by simulation.Item Исследование температурной зависимости дрейфа ВОГ(Національний університет «Запорізька політехніка», 2012) Кузнецов, Ю. А.; Олейник, С. В.; Успенский, В. Б.; Хацько, Н. Е.; Кузнєцов, Ю. О.; Олійник, С. В.; Успенський, В. Б.; Хацько, Н. Є.; Kuznyetsov, D. Y.; Oleynik, S.; Uspensky, D. V.; Khatsko, N.RU: Рассматривается способ повышения точности измерений волоконно-оптического гироскопа (ВОГ) в условиях нестационарной температуры. Построена математическая модель температурной зависимости дрейфа ВОГ. Приведены результаты анализа экспериментальных данных, моделирования. Делается вывод о высокой эффективности разработанной модели. UK: Розглянуто спосіб підвищення точності вимірів волоконно-оптичного гіроскопа (ВОГ) в умовах нестаціонарної температури. Побудована математична модель температурної залежності дрейфу ВОГ. Приведені результати аналізу експериментальних даних, моделювання. Зроблено висновок про високу ефективність використаної моделі. EN: The way to improve the accuracy of measurements of fiberoptic gyroscope (FOG) OIUS501 production of Russian company «Optolink» is examined. The studies were conducted to assess the use of these sensors to control the orientation of the satellite. The experiment was carried in a heat chamber in rising and lowering the temperature in given (selected) range. The experimental data were subjected to the averaging and smoothing. Several mathematical models depending on the temperature drift of the FOG and the rate of temperature change are proposed. To assess the quality of the approximation the criterion of a minimum average error of measurements approximation and the criterion of minimum rootmean-square deviation of approximation error are used. In result the model was selected, which allows to reduce the variability of the drift of FOG in the launch from the values 2°deg / h to the level of 0,05 deg / h.Item Агрегатор численности контингента университета(Національний університет «Запорізька політехніка», 2012) Коломоец, Г. П.; Пашков, Д. В.; Коломоєць, Г. П.; Пашков, Д. В.; Kolomoets, G. P.; Pashkov, D. V.RU: В статье описана используемая в Классическом приватном университете, г. Запорожье программа-агрегатор численности контингента, которая осуществляет выборку информации из различных баз данных и представляет функциональный Web-интерфейс, позволяющий отслеживать изменение численности студентов и слушателей колледжа по различным направлениям/специальностям, курсам и формам обучения. UK: У статті описана програма-агрегатор чисельності контингенту, що використовується в Класичному приватному університеті, м. Запоріжжя, яка здійснює вибірку інформації з різних баз даних і представляє функціональний Web-інтерфейс, що дозволяє відслідковувати зміну чисельності студентів і слухачів коледжу з різних напрямів/спеціальностей, курсів та форм навчання. EN: Purpose of the article – to represent the solution of the problem of data aggregation from different systems in a single, Web-based application developed with the use of cross-platform open source software. The paper describes the architecture and implementation of university students’ contingent quantity aggregator – the software application that is working with several university information systems (IS). The application has convenient tools contingent quantity calculating and displaying it in summary form and in the form of diagrams. Application is implemented on the Java platform and uses a three-tier client-server architecture with application server. For IS databases access we used JDBC technology, access was organized via servlets’ methods, Spring framework objects (beans) was used as data sources, Feature of these objects is to use the generic method developed by the authors to connect to different IS and universal method that returns data from the database, in the form either of a one-dimensional or two-dimensional data collection. So adding a new data source is a simple procedure based on the XML configuration. The system also implements the administrative tools that include management of users and roles, and logging.Item Методика исследования способов оптимизации управляющих автоматов в базисе ПЛИС FPGA(Національний університет «Запорізька політехніка», 2012) Гриценко, А. А.; Зеленева, И. Я.; Сероштан, С. Ю.; Татолов, Е. Р.; Гриценко, А. О.; Зеленьова, І. Я.; Сіроштан, С. Ю.; Татолов, Є. Р.; Grytsenko, А. А.; Zelenyova, I. J.; Siroshtan, S. Y.; Tatolov, E. R.RU: В статье предложена методика, позволяющая исследовать известные способы оптимизации управляющих автоматов для базиса современных ПЛИС FPGA. Показана структура комплекса программных средств, необходимых для реализации методики, а также представлены результаты ее апробации. UK: У статті запропонована методика, що дозволяє досліджувати відомі способи оптимізації керуючих автоматів для базису сучасних ПЛІС FPGA. Показана структура комплексу програмних засобів, необхідних для реалізації методики, а також представлені результати її апробації. EN: Methodology of research of known FSM optimization methods for modern FPGAs is proposed. Such methodology consists of different FSM generation, optimization, synthesis, verification stages and can be implemented using parallel and distributed systems. That approach can lead to the efficient results because of methodology nature. The general idea is to figure out the necessary tools and algorithms to prove, that optimized model of FSM has the same behavior as initial model. The structure of standard and specialized software tools for methodology implementation is demonstrated and analyzed. The results of methodology approbation using well-known FSM optimization method targeting Altera FPGAs are pointed out.Item Самонавчанна фаззі-спайк-нейронна мережа на основі дискретних динамічних ланок другого порядку для нечіткої кластеризації(Національний університет «Запорізька політехніка», 2012) Бодянський, Є. В.; Долотов, А. І.; Малишева, Д. М.; Bodyanskiy, Ye.; Dolotov, A. I.; Malysheva, D. M.UK: Розглянуто гібридні нейронні мережі, що засновані на ідеї поєднання спайк-нейронних мереж та принципів нечіткої логіки. У статті запропоновано архітектуру самонавчанної фаззі-спайк-нейронної мережі на основі дискретних динамічних ланок другого порядку. Запропоновано опис спайк-нейронної мережі в рамках теорії автоматичного керування. Синапси спайк-нейрона представлені як ланки другого порядку, а сома як система порогового виявляння. Спайк-нейронна мережа, реалізована таким чином, є аналого-цифровою нелінійною динамічною системою, що передає та обробляє інформацію і в часоімпульсній, і в часонеперервній формах. EN: Hybrid neural networks based on the idea of combining spiking neural networks and the principles of fuzzy logic are considered. The architecture of self-learning fuzzy spiking neural network based on discrete second-order critically damped response units is proposed. It is proposed to define a spiking neural network in terms of apparatus of classical automatic control theory based on the Laplace transform and z-transform. It is shown that a spiking neural network is a pulse-position threshold detection system based on second-order damped response units. Such kind of description allows using it as an analog-digital system in technical problems solving. The output layer takes firing times of spikes arriving from the second layer, and either performs fuzzy partitioning of the input patterns using probabilistic approachItem Решение матричной 3хN-игры для оптимального комбинирования алгоритмов обучения нейронной сети с мерой ошибки идентификации по времени обучения при объеме потребляемых ресурсов(Національний університет «Запорізька політехніка», 2012) Романюк, В. В.; Романюк, В. В.; Romanuke, V. V.RU: Рассматривается произвольная нейронная сеть с тремя взаимозависимыми показателями: мера ошибки идентификации, получаемая после времени обучения по одному из возможных N алгоритмов обучения нейросети, соответствует некоторому объему потребляемых ресурсов. Для условия невозможности указания приоритетности и количественного ранжирования этих показателей предлагается переход к соответствующей -игре и ее решению в форме оптимальной стратегии второго игрока, с чьими вероятностями следует комбинировать алгоритмы обучения нейросети. При первоначальной неприемлемости критерия Байеса-Лапласа для выбора оптимального алгоритма применимость этого критерия поддерживается лишь после истечения определенного периода времени функционирования нейросети, когда станет возможным точечное оценивание весов ее показателей. UK: Розглядається довільна нейронна мережа із трьома взаємозалежними показниками: міра помилки ідентифікації, одержувана після часу навчання за одним з можливих N алгоритмів навчання нейромережі, відповідає деякому об’єму споживаних ресурсів. Для умови неможливості вказівки пріоритетності й кількісного ранжування цих показників пропонується перехід до відповідної -гри та її розв’язку у формі оптимальної стратегії другого гравця, із чиїми ймовірностями варто комбінувати алгоритми навчання нейромережі. При первісній неприйнятності критерію Байєса-Лапласа для вибору оптимального алгоритму застосовність цього критерію підтримується лише після закінчення певного періоду часу функціонування нейромережі, коли стане можливим точкове оцінювання ваг її показників. EN: A neural network is considered with three interdependent indexes: identification error measure, being acquired after the learning time by one of the N available algorithms for the neuronet learning, corresponds to some volume of the consumed resources. For condition of unfeasibility of pointing at the priority and ranking quantitatively these indexes we suggested the conversion into the corresponding game and its solution in the form of the second player optimal strategy, with whose probabilities the algorithms for the neuronet learning should be combined. Despite the primary inadmissibility of the Bayes-Laplace criterion for optimal algorithm selection this criterion applicability is supported only on the expiry of a certain time period of the neuronet functioning, when the point evaluation of its indexes weights becomes available. In giving an example with four algorithms for the neuronet learning, we calculated its guaranteed indexes after having combined those algorithms optimally, where worsening of such indexes is also demonstrated by the other approach.Item Модели встроенного ремонта логических блоков(Національний університет «Запорізька політехніка», 2012) Хаханов, В. И.; Мурад Али Аббас; Литвинова, Е. И.; Хаханова, И. В.; Хаханов, В. І.; Мурад Алі Аббас; Литвинова, Є. І.; Хаханова, І. В.; Hahanov, V. I.; Murad Ali Abbas; Litvinova, E. I.; Hahanova, I. V.RU: Предложены модели комбинационных схем, ориентированные на решение практических задач встроенного восстановления работоспособности компонентов логических устройств. Логическая схема дополняется операционным и управляющим автоматами моделирования цифровых устройств, что увеличивает время обработки и аппаратные затраты для создания оболочки адресуемых элементов. Структуры также можно использовать для аппаратного моделирования функциональностей цифровых проектов на основе использования PLD, что дает возможность существенно повысить быстродействие верификации программных моделей. Предложенное решение задачи встроенного ремонта логических элементов комбинационных схем дает возможность комплексно решать проблему автономного восстановления работоспособности цифровых систем на кристаллах за счет временной и аппаратной избыточности проекта [1–23]. UK: Запропоновано моделі комбінаційних схем, орієнтовані на розв’язання практичних задач убудованого відновлення працездатності компонентів логічних пристроїв. Логічна схема доповнюється операційним і керуючим автоматами моделювання цифрових пристроїв, що збільшує час обробки та апаратні витрати для створення оболонки елементів, що адресуються. Структури також можна використовувати для апаратного моделювання функціональностей цифрових проектів на основі використання PLD, що дає можливість суттєво підвищити швидкодію верифікації програмних моделей. Запропоноване рішення задачі вбудованого ремонту логічних елементів комбінаційних схем дає можливість комплексно вирішувати проблему автономного відновлення працездатності цифрових систем на кристалах за рахунок часової та апаратної надлишковості проекту. EN: The goal of this article is to improve the quality and reliability of digital systems-on-chips by creating an infrastructure for embedded testing, diagnosis, optimization and repairing through the use of hardware redundancy and reduce the speed of functional operations. The models of combinational circuits, focused on solving real-world problems of embedded repairing components of the logic devices, are proposed. The logical scheme is improved by using operational and control automaton for modeling digital devices, and focused on solving practical problems of embedded repairing logic components by increasing the processing time and additional hardware costs to create wrapper of addressable elements. The proposed structures can also be used for hardware modeling functionalities of digital projects through the use of PLD, which allows significantly improving the performance of software model verification. The proposed solution of embedded repair of gates for combinational circuits makes it possible to comprehensively solve the problem of autonomous repair of digital system-on-chip through the use of time and hardware design redundancy.Item Математическое моделирование некоторых крепежных соединений на базе теории R-функций(Національний університет «Запорізька політехніка», 2012) Чопоров, С. В.; Гоменюк, С. И.; Лисняк, А. А.; Панасенко, Е. В.; Чопоров, С. В.; Гоменюк, С. І.; Лисняк, А. О.; Панасенко, Є. В.; Choporov, S. V.; Gomenyuk, S. I.; Lisnyak, A. A.; Panasenko, E. V.RU: В статье рассмотрена проблема математического моделирования сложных геометрических объектов на базе теории R-функций. Предложены новые математические модели наиболее распространенных гаечных и болтовых соединений. UK: У статті розглянута проблема математичного моделювання складних геометричних об’єктів на базі теорії R-функцій. Запропоновано нові математичні моделі найбільш поширених гайкових та болтових з’єднань. EN: The functional approach is one of the most general approaches in geometrical modeling. The functional approach describes complex geometrical objects (like engines, aircrafts, etc.) using mathematical formulas. A popular method for representation geometrical object in mathematical formulas uses implicit functions. These implicit functions can be constructed using logical operations under corresponded to simple objects functions. V. L. Rvachev real-valued functions called R-functions represent logical operations (negation, conjunction, disjunction, etc) under implicit functions. A fastener is a hardware device that mechanically joins or affixes two or more objects together. In the article authors propose geometrical models based on R-functions for different fasteners (some types of bolts, nuts). In the first section of the article authors describe implicit functions for representation of basic primitives (a regular polygon, a chamfer). The next section aims to obtain of 3D models of fasteners using R-functions under primitives. Some visual examples are shown in the final section.Item Властивості асоціативних залежностей у аналізі даних(Національний університет «Запорізька політехніка», 2012) Пшеничний, О. Ю.; Pshenychnyi, O. Y.UK: У статті наведено результати дослідження властивостей асоціативних залежностей та можливостей їх ефективного агрегування. Розрозбено метод виявлення асоціативних залежностей широкого класу у великих наборах даних. EN: This paper describes the results of research in the field of associative dependencies properties and effective aggregation possibilities. Also it briefly describes the developed method of special class of associative dependencies detection in large data volumes. The main idea of this research is aggregation of elementary associative dependencies into more complicated once. This approach gives good performance results and allows processing data volumes with millions records. Current paper shows how it is possible to define algebra of associative dependencies with few main operations and rules of inference, taking place in such algebra. The rule set completeness is also proven here to be sure that no rules are lost during inference. The outcome of described theory is highly effective data analysis method, capable to detect wide range of associative dependencies in relational data.Item Дифференциальные свойства блочных симметричных шифров с модульными операциями введения цикловых подключей, отличающихся от XOR(Національний університет «Запорізька політехніка», 2012) Лисицкая, И. В.; Настенко, А. А.; Лисицька, І. В.; Настенко, А. О.; Lysytska, I. V.; Nastenko, A. A.RU: Рассматриваются дифференциальные свойства блочных симметричных шифров с применением разных модульных операций вычисления парных разностей. UK: Розглядаються диференціальні властивості блокових симетричних шифрів з застосуванням різних модульних операцій обчислення парних різниць. EN: Symmetric block ciphers differential properties with various round key operations are considered. It is shown that known ciphers with round operations other than XOR after small initial encryption rounds acquire random substitution properties of correspondent degree, but they achieve stationary maximal value two times smaller than maximal value acquired for round operation as bitwise XOR. It is concluded that application of round operations other than XOR does not lead to significant growth of provable cipher strength. It is mentioned that all iterative ciphers independently of round key operation type give the same maximal values of full differentials according to difference computation operation as bitwise XOR.Item Алгоритм решения задачи оптимизации для циклических расписаний с прерываниями(Національний університет «Запорізька політехніка», 2012) Иванов, Ю. А.; Іванов, Ю. О.; Ivanov, Y. A.RU: Рассмотрена задача оптимизации циклической организации вычислительного процесса системы жесткого реального времени. Определены особенности целевой функции. Обоснован выбор целочисленного метода оптимизации задачи построения расписания. Предложен алгоритм решения адаптированным методом ветвей и границ. UK: Розглянута задача оптимізації циклічної організації обчислювального процеса системи жорсткого реального часу. Визначені особливості цільової функції. Обґрунтований вибір цілочисельного метода оптимізації задачі побудови розкладу. Запропонований алгоритм рішення адаптованим методом меж і гілок. EN: In this paper, we consider a model of the problem to determine the characteristics of the time-step computation process in hard real-time systems. We proposed a formal description of the time-step computation with preemption and its existence conditions. A necessary condition for the feasibility of the schedule was determined. We took into account the behavior of the function graphs to optimize the schedule. We analyzed the mathematical model features including the objective function and the constraints. In the paper we determined the upper and lower limits of total function variation. The possible approaches to solving the optimization problem were introduced. We proposed to solve that task by the branch and bound method. In the proposed approach the objective function is represented as the set or branches included in the method tree. We developed the algorithm to determine characteristics of the time-step computation process and give a detailed description. The performance of the algorithm was shown by test case.Item Генерация операторов перехода для параллельного управления шагом при моделировании линейных динамических систем(Національний університет «Запорізька політехніка», 2012) Дмитриева, О. А.; Дмитрієва, О. А.; Dmitrieva, O. А.RU: Предложены параллельные алгоритмы моделирования линейных динамических объектов, основанные на построении операторов перехода. Разработанные алгоритмы базируются на вложенных стадийных схемах и позволяют осуществлять автоматический выбор оптимального размера шага в каждой точке сетки. Параллельная реализация ориентирована на кластерные вычислительные системы типа MIMD. UK: Запропоновано паралельні алгоритми моделювання лінійних динамічних об’єктів, засновані на побудові операторів переходу. Розроблені алгоритми базуються на вкладених стадійних схемах і дозволяють здійснювати автоматичний вибір оптимального розміру кроку в кожній точці сітки. Паралельна реалізація орієнтована на кластернi обчислювальні системи типу MIMD. EN: Parallel algorithms of modeling of the linear dynamic objects based on the construction of transition operators are offered. The developed algorithms are based on the nested stages schemes and allow one to fulfill an automatic selection of the optimum step size at each grid point. Parallel realization is focused on the cluster computing systems of type MIMD. The basic idea, which is based on the construction of the transition operators for solving linear systems of ordinary differential equations on parallel computers, is the simultaneous receipt of two approximations of different orders. Step control algorithms proposed in the article are based on the use of nested stages methods. Parallel processing is carried out within each step with the number of stages s and s+1. Two strands of calculations are independent and need to exchange occurs only after the final results for the calculation points. Transition operators for each s-stage method are built once, before the calculations and allow reducing the number of matrix operations performed at each step by s times due to parallel implementation.Item Формування факторів впливу на поведінку інформаційного продукту(Національний університет «Запорізька політехніка», 2012) Вовк, О. Б.; Шаховська, Н. Б.; Vovk, O. B.; Shakhovska, N. B.UK: У статті уведено поняття інформаційного продукту, метаданих інформаційного продукту, ефективності використання інформаційного продукту. Сформований необхідний і достатній перелік факторів впливу на ефективність використання інформаційного продукту. Розроблено шкалу ранжування факторів впливу та створено оціночну шкалу по кожному фактору. EN: Received factors can be used in the formation of the factors’ system in studies related to effective use of information products in the information society. The need to study the efficiency of information products is caused by permanent change of existing information or appearance of new information. Therefore, it is necessary to determine the possible change of impact factors that will affect the behavior of information products. A set of impact factors, formed in the article, allowed to estimate the efficiency of use in terms of information products positioning on the market and made it possible to chart the effectiveness of information product.Item Модель динамики территориально распределенной сервисной системы(Національний університет «Запорізька політехніка», 2012) Бескоровайный, В. В.; Соболева, Е. В.; Безкоровайний, В. В.; Соболєва, О. В.; Beskorovainyi, V.; Soboleva, O.RU: В качестве математической модели территориально распределенных сервисных систем предлагается адаптированная модель системной динамики производственно-сбытового предприятия. Предложенная модель позволяет получить оценки характеристик динамики функционирования объекта при относительно быстром изменении спроса на обслуживание. Приведены результаты моделирования территориально распределенного сервисного объекта. UK: В якості математичної моделі територіально розподілених сервісних систем пропонується адаптована модель системної динаміки виробничо-збутового підприємства. Розроблена модель дозволяє отримувати оцінки характеристик динаміки функціонування об’єкту в умовах відносно швидкої зміни попиту на обслуговування. Наведено результати моделювання територіально розподіленого сервісного об’єкту. EN: This paper reports the development of a System Dynamics model for the Strategic planning of a municipal service system. The model is capable of handling the critical variables that impact the operations of a delivery scheme. The model was developed using the Vensim programming software to handle the process dynamics. There are presented results of the proposed model simulation of the municipal service system with a 100 % increase of service demand. It is concluded that the model developed is sensitive to variable changes and has the capability of answering various operational what-if questions. As a strategic planning tool, the present model generates, for different scenarios, important operational information for the management of resources of the municipal service system.Item Интервальный анализ и его применение при расчетах параметров серверных компьютерных систем(Національний університет «Запорізька політехніка», 2012) Аноприенко, А. Я.; Иваница, С. В.; Хамза, Аль Рабаба; Анопрієнко, О. Я.; Іваниця, С. В.; Хамза, Аль Рабаба; Anopriyenko, А.; Ivanitsa, S.; Hamza, А.RU: Рассмотрены основные свойства интервалов и операций над ними с целью демонстрации преимуществ использования интервальных типов данных в качестве входных и результирующих параметров, а также использование интервального анализа как основного инструментария при реализации комплексных расчетов параметров серверных компьютерных систем. Показаны пути перехода от традиционного представления сетевых параметров к интервальному. Приведена демонстрация применения интервальных вычислительных методов на примере расчета времени отклика системы обработки запросов. UK: Розглянуто основні властивості інтервалів та операцій над ними з метою демонстрації переваг використання інтервальних типів даних в якості вхідних і результуючих параметрів. Показано шляхи переходу від традиційного уявлення мережевих параметрів до інтервального. Наведена демонстрація застосування інтервальних обчислювальних методів на прикладі розрахунку часу відгуку системи обробки запитів. EN: Emergence the uncertainties and ambiguities in the implementation of complex data in calculations of parameters server computer systems is a factor that justifies the use of methods and means of interval analysis in developing improved methods of key parameters server-based computing systems and networks, enabling more efficient use of server computer resources. The article describes basic properties of intervals and operations on them to demonstrate the advantages of using interval data types as input and output parameters; shows the transition from the traditional view of network parameters to interval; gives a demonstration of the use of computational methods for interval calculation example response time queries.Item Выбор общего источника сигнала для региональной системы синхронизации времени и частоты(Національний університет «Запорізька політехніка», 2012) Коваль, Ю. А.; Костыря, А. А.; Соляник, О. А.; Семенов, С. Ф.; Плехно, С. А.; Асаад, Х. Х.; Коваль, Ю. О.; Костиря, О. О.; Солянік, О. А.; Семенов, С. Ф.; Плехно, С. О.; Асаад, Х. Х.; Koval, Y.; Kostyrja, A.; Solyanik, O.; Semyonov, S.; Plehno, S.; Asaad, Khalid-HRU: Проведен сравнительный анализ сигналов наиболее распространенных наземных радиоисточников с целью их использования в качестве общего источника сигналов при построении местной (региональной) пассивной системы синхронизации времени и частоты. Сделан вывод о перспективности использования сигналов цифрового наземного телевидения. UK: Проведено порівняльний аналіз сигналів найбільш розповсюджених наземних радіоджерел з метою їх використання в якості спільного джерела сигналів при побудові місцевої (регіональної) пасивної системи синхронізації часу та частоти. Зроблено висновок про перспективність використання сигналів цифрового наземного телебачення. EN: In this article some results of comparative analysis of mostly used terrestrial radio signal sources are published. The aim of this observation is to utilize the sources signal as a common signal source in building Time and Frequency Synchronization System, according to common views algorithm. As a common sources digital TV broadcasting of (DVB-T2) signals and analog (Secam) TV signals were investigated. The correlation properties of this signals are investigated theoretically and practically. The list of equipment used in investigations: TV and FM signal receiver, digital oscilloscope, and software for calculation of inter- and autocorrelation functions and statistics. The correlational and statistical analysis proved that the signals of digital television format DVB-T2 can be effectively used as a general source for synchronization time and frequency scales by using common views algorithm.Item Вибір стратегії призначення інтервальних допусків(Національний університет «Запорізька політехніка», 2012) Шило, Галина Миколаївна; Веснін, І. М.; Гапоненко, Микола Прокопович; Shilo, G. M.; Vesnin, I. M.; Gaponenko, M. P.UK: Розглянуто особливості призначення номінальних допусків при інтервальному законі розподілу і зміні властивостей елементів в процесі експлуатації радіоелектронних пристроїв. Враховуються інтервальні коефіцієнти зовнішніх впливів. Отримано співвідношення для оптимального значення допустимих відхилень параметрів в стратегіях рівних допусків, максимального об’єму допускової області, мінімальної вартості і оптимального співвідношення ціна/якість. EN: Peculiarities of assigning the nominal tolerances for interval distribution law and changing the properties of components in the operation of electronic devices are considered. Interval coefficients of external influences, aging and simultaneous action of several external factors and placement of electronic components into devices are taken into account. The model of output function is formed for the worst case of external influence composition. To assign rating tolerances the coordinates of boundary points are recalculated to normal operating conditions. The optimal value of parameter deviations are obtained by equal tolerances, the maximum volume of tolerance region, the minimum cost and the optimal cost / quality relation strategies. Cost characteristic of electronic components are used. Volume tolerance is a measure of the quality. If it increases, manufacturing defects are reduced. The strategies of tolerance design are compared. Matrices of basic parameters and vertex of strategy coefficients are formed. To choose strategy the coefficients of design strategies are compared. To choose electric circuit the coefficients of tolerance design are used. The application example of proposed methods is given.Item Сравнение программ проектирования на примерах моделирования микрополосковых фильтров с отверстиями в экране(Національний університет «Запорізька політехніка», 2012) Фурманова, Наталья Ивановна; Фарафонов, Алексей Юрьевич; Романенко, Сергей Николаевич; Шинкаренко, Эдуард Николаевич; Мищенко, Марина Владимировна; Фурманова, Наталія Іванівна; Фарафонов, Олексій Юрійович; Романенко, Сергій Миколайович; Шинкаренко, Едуард Миколайович; Міщенко, Марина Володимирівна; Furmanova, N. I.; Farafonov, O. Yu.; Romanenko, S. M.; Shynkarenko, E. N.; Mishchenko, M. V.RU: Проведен сравнительный анализ программ проектирования Microwave Office и HFSS на примерах моделирования микрополосковых полосно-пропускающего фильтра и фильтра нижних частот с отверстиями в экране. Представлены результаты численного моделирования фильтров в сравнении с экспериментальными данными. UK: Проведено порівняльний аналіз програм проектування Microwave Office і HFSS на прикладах моделювання мікросмужкових смугового фільтра і фільтра нижніх частот з отворами в екрані. Представлені результати чисельного моделювання фільтрів в порівнянні з експериментальними даними. EN: A comparative analysis of design programs Microwave Office and HFSS on examples of microstrip filters with slots in the ground plane was performed. The results of numerical modeling of the filters in comparison with experimental data are presented. Microwave Office’s advantages are an intuitive user-friendly interface and ease of development, the availability of extensive elements library which simplifies and speeds up the design process. However Microwave Office has some disadvantages: using of rectangular grid for drawing the object and time of the analysis models. The main advantages of HFSS are a high speed calculation with sufficient accuracy of the results in comparison with experiment. Using tetrahedral shape cells allows to more accurately describe the three-dimensional structures. The disadvantages of this CAD are difficulty of development and complexity of specifying ports. Thus, the system Microwave Office is better to use during the initial modeling. For more accurate results, if data about ports’ dimension are given, system HFSS is preferable.Item Проектирование пластинчато-ребристых радиаторов минимальной массы(Національний університет «Запорізька політехніка», 2012) Огренич, Евгений Викторович; Огренич, Євген Вікторович; Ogrenich, E.RU: Описывается тепловая модель пластинчато-ребристого радиатора. Получены соотношения и предложен алгоритм оптимизации массы радиатора. Проведено сравнение массогабаритных показателей ребристых и пластинчато-ребристых радиаторов. UK: Описується теплова модель пластинчато-ребристого радіатора. Отримано співвідношення і запропоновано алгоритм оптимізації маси радіатора. Проведено порівняння масогабаритних показників ребристих і пластинчато-ребристих радіаторів. EN: The thermal model of plate-finned heat sink is formed and described. The mathematical model of operability domain ellipsoid is created by approximating its borders. The optimization problem of heat sink mass is solved by Lagrange multipliers method. Hyperbolic model of the target function is used. The ratios for optimum mass of heat sink are found. The algorithm of heat sink design is developed. The initial approximation of standardized heat sink parameters is used. Thermal resistance is found by the numerical simulation in the systems engineering analysis. The mass and size parameters of finned and plate-finned heat sinks are compared. It is found, the optimization of finned and plate-finned heat sinks allows to reduce their weight by 2–3 times, and the volume is increased by 2 times. Optimized heat sinks have similar values of volumes; the mass of finned heat sink is less on 10 %. The using of plate-finned heat sink allows to increase the thickness of the fins on 50 % and to improve manufacturability of heat sinks elements.Item Порівняльна оцінка надійності трьох конфігурацій відмовостійкої системи з мажоритарною структурою(Національний університет «Запорізька політехніка», 2012) Мандзій, Б. А.; Волочій, Б. Ю.; Озірковський, Л. Д.; Змисний, М. М.; Муляк, О. В.; Mandzyi, B. A.; Volochyi, B. Yu.; Ozirkovskyi, L. D.; Zmysnyi, M. M.; Muliak, O. V.UK: В статті здійснено порівняння надійності, яку можуть забезпечувати відмовостійкі системи з мажоритарною структурою, а саме: три мажоритарні структури вкладені в мажоритарну структуру, мажоритарна структура з реконфігурацією ядра та мажоритарна структура з фіксованим правилом прийняття рішення. Розробка моделей відмовостійких систем здійснена за допомогою технології аналітичного моделювання з представленням їх у вигляді дискретно-неперервної стохастичної системи. EN: A comparision of reliability, which can provide the fault-tolerant system with a majority structure, namely: three majority structure embedded in majority structure, majority structure with the reconfiguration of the core structure and majority structure with a fixed rule decision was performed in the paper. Designing of fault-tolerant systems implemented with the help of analytical modeling with representation them as discrete-continuous stochastic system. Results of the comparison showed that mean time to failure for fault-tolerant system based on majority structure with fixed rule decision such as «2 of 3» plus 6 technical systems in reserve by 28 % higher compared with the fault-tolerant system using three majority structures embedded in majority structure and by 7 % higher compared with the rate obtained for fault-tolerant system with reconfiguration of core of majority structure type structure «3 of 5» plus 4 technical systems in reserve.