Радіоелектроніка, інформатика, управління - 2013, №2 (29)
Permanent URI for this collectionhttps://eir.zp.edu.ua/handle/123456789/29056
Browse
Recent Submissions
Item Особенности регулирования электроприводов c косвенным измерением скорости(Національний університет «Запорізька політехніка», 2013) Чепкунов, Р. А.; Левинзон, Д. И.; Чепкунов, Р. А.; Левінзон, Д. І.; Chepkunov, R. A.; Levinzon, D. I.RU: Приводятся результаты исследования систем регулирования электропривода постоянного тока и асинхронного электропривода с косвенным измерением скорости с учетом влияния обратных связей по току и напряжению на устойчивость системы. Определены условия устойчивости: системы регулирования при положительной обратной связи по току; контура регулирования с тиристорным преобразователем при цифровом сглаживании пульсаций; асинхронного двигателя как объекта регулирования. Обоснованы структурные схемы и параметры системы, обеспечивающие качественное регулирование. UK: Приводяться результати дослідження системи регулювання електропривода постійного струму і асинхронного електропривода з непрямим вимірюванням швидкості з урахуванням впливу зворотних зв’язків за струмом і напругою на стійкість системи. Визначені умови стійкості: системи регулювання при додатному зворотному зв’язку за струмом; контуру регулювання з тиристорним перетворювачем при цифровому згладжуванні пульсацій; асинхронного двигуна як кола регулювання. Обґрунтовано структурні схеми і параметри системи, які забезпечують якісне регулювання. EN: The features of control of the electric drives with the indirect measuring of speed are related by the presence of positive feed-back on a current, by the large pulsations of signal of feed-back on voltage in the direct-current electric drive, by the display of instability of electric motor in an asynchronous electric drive. The areas of stability at a positive feed-back on a current in the direct-current electric drive and on the active constituent of current in an asynchronous electric drive are certain. For reduction of the sensor inertness of the thyristor converter voltage the digital smoothing out of pulsations of the feed-back signal offers and the areas of stability of the control system are certain. The areas of stability of asynchronous electric drive are certain depending on the coefficient of dispersion of magnetic stream, electromechanics permanent to time, permanent to time of stator and rotor, the method of suppression of self-excited oscillations offers. The structural schemes and system parameters that ensure quality control are substantiated.Item Управление лабораторным стендом манипулятора МП-9С с помощью математического пакета моделирования(Національний університет «Запорізька політехніка», 2013) Орловский, Игорь Анатольевич; Орловський, Ігор Анатолійович; Orlovskyi, I. A.RU: Разработан лабораторный стенд компьютерного управления манипулятором МП-9С из пакета Simulink системы Matlab. Описано подключение стенда к компьютеру с использованием платы PCI 1711 и блока PCLD-6710. Приведен пример системы управления в пакете Simulink. Рассмотрен порядок выполнения лабораторных работ на стенде. Осуществление компьютерного управления позволило проверить теоретические знания студентов по синтезу дискретных автоматов при управлении в реальном времени манипулятором и получить практические навыки работы с оборудованием. UK: Розроблено лабораторний стенд комп’ютерного керування маніпулятором МП-9С з пакету Simulink системи Matlab. Описано підключення стенду до комп’ютера з використанням плати PCI 1711 і блоку PCLD-6710. Наведено приклад системи керування в пакеті Simulink. Розглянуто порядок виконання лабораторних робіт на стенді. Здійснення комп’ютерного керування дозволило перевірити теоретичні знання студентів з синтезу дискретних автоматів при керуванні у реальному часі маніпулятором і отримати практичні навички роботи з обладнанням. EN: An important component of student learning process automation systems is to provide skills installation, commissioning, maintenance and use of theoretical knowledge in the projects of modernization of equipment. To improve laboratory practice in the Zaporozhye National Technical University in the department of industrial electric and automation systems with the participation of students developed computer control (using the theory of discrete automata) of the package Simulink of Matlab laboratory bench manipulator MP-9C. Technical description is given of the laboratory bench, consisting of: the mechanical part of the robot arm, pneumatic, manipulator control system for logic elements, position sensors, remote control, connector board and the computer. Modernization of the stand allowed by the developed technique to improve student learning devices and features computer control arm, as well as the practical application of the theory of synthesis of discrete automata.Item Компрессия Ultra HD-видеоинформации в распределенной компьютерной системе(Національний університет «Запорізька політехніка», 2013) Скрупский, Степан Юрьевич; Скрупський, Степан Юрійович; Skrupsky, S. Y.RU: Рассмотрены преимущества и недостатки современного формата представления видеоинформации Ultra HD. Выполнена оценка вычислительной сложности операции поиска векторов движения в видеопоследовательности. Проанализирован метод распределения видеоинформации по узлам распределенной системы, который использован для распараллеливания процесса компрессии видеоинформации на кластере. Экспериментально исследованы объективные показатели результата компрессии Ultra HD-видеоинформации в распределенной системе в зависимости от применяемого алгоритма оценки движения и ширины области поиска векторов движения. UK: Розглянуто переваги та недоліки сучасного формату відтворення відеоінформації Ultra HD. Виконано оцінку обчислювальної складності операції пошуку векторів руху у відеопослідовності. Проаналізовано метод розподілу відеоінформації по вузлах комп’ютерної системи, який використано для розпаралелювання процесу компресії відеоінформації на кластері. Експериментально досліджено об’єктивні показники результату компресії Ultra HD-відеоінформації у розподіленій системі в залежності від використовуваного алгоритму оцінки руху та ширини області пошуку векторів руху. EN: The article deals with the parallelization of Ultra HD-videoinformation compression process in distributed system. The advantages and disadvantages of modern Ultra HD video format have been discussed. The evaluation of the computational complexity of the motion estimation operation in video sequences has been performed. The method for video distribution over the nodes of a distributed system, based on correlation analysis of video frames with the dynamic sensitivity function, has been analyzed. It has been used for parallelization of videoinformation compression process at Pukhov Institute for Modelling in Energy Engineering cluster. The objective indicators of Ultra HD-videoinformation compression results in a distributed system depending on used motion estimation algorithm and the width of the motion vectors search region have been investigated experimentally. The overheads of videoinformation compression process in distributed system have been analyzed.Item Информационная технология определения номера на чугуновозном ковше(Національний університет «Запорізька політехніка», 2013) Сергиенко, А. В.; Каргин, А. А.; Сергієнко, А. В.; Каргін, А. А.; Sergienko, A. V.; Kargin, A. A.RU: В статье рассматривается информационная технология определения номера на чугуновозном ковше. Выделены и раскрыты этапы обработки: предварительная фильтрация и неполная пороговая обработка глобальной бинаризацией, локализация при помощи кластеризации изображения и идентификация, при помощи оригинального метода, базирующегося на нечетком представлении изображений и сравнении их с нечеткими эталономи. В результате проведенных экспериментов подтверждается эффективность обработки по предлагаемой технологии. UK: У статті розглядається інформаційна технологія визначення номера на чавуновізному ковші. Виділені й розкриті етапи обробки: попередня фільтрація й неповна гранична обробка глобальною бінаризациією, локалізація за допомогою кластеризації зображення й ідентифікація, за допомогою оригінального методу, що базується на нечіткому представленні зображень і порівнянні їх з нечіткими еталонами. У результаті проведених експериментів підтверджується ефективність обробки за пропонованою технологією. EN: The article describes the information technology for recognition of the number on the hot metal transfer ladle. Processing stages have been identified and described: preliminary processing, localization and number identification. The filtration and incomplete thresholding by means of global binarization with an automatic choice of a threshold have been analyzed. Localization is executed by a single linkage (the nearest neighbour) method with the modified windowing search algorithm. After localization area has been identified, a segment is generated. Identification is accomplished by means of a unique method, which is based on an indistinct representation of images and their comparison with indistinct standards. Combining in a characteristic point the segment which is being analyzed with a prototype segment kernels are formed. Those are then fractured into blocks. Based on these blocks two fuzzy sets are obtained – one for the segment that is being analyzed and one for the prototype. For these sets the relative Hamming distance is then calculated. The calculated value shows the degree of similarity of the segments. During the tests it was proved that the Hamming distance for the segments with identical numbers is 0,01÷0,16, whereas for the segments with numbers of different ladles it is 0,26÷0,49, which is enough for a successful identification of a ladle by the image of its number.Item Analytical support of requirements development for intelligent e-learning systems(Національний університет «Запорізька політехніка», 2013) Pishchukhina, O. A.; Піщухіна, О. О.EN: The problems of analysis and modeling of requirements while development of e-learning systems with feedback are considered. Subject area of requirements development is determined, choice of CASE-tools for creating models from generated subject area is explained. Visual models of functional requirements and user requirements in the form of diagrams showing the development of behavior and the logical structure of the system are developed. Simulation models explain the events and the corresponding response of the system and can represent its processes of interaction on more higher level of abstraction and allow to reveal incorrect, inconsistent, missing or redundant requirements. Consequence diagram, diagram of cooperation and state transition diagram are considered as analytical support of requirements development for intelligent e-learning systems. UK: Розглянуто питання аналізу та моделювання вимог при розробці засобів електронного навчання зі зворотним зв’язком. Визначено предметну область формування вимог, обґрунтовано вибір CASE-засобів для побудови моделей сформованої предметної області. Розроблено візуальні моделі функціональних вимог і вимог користувача у вигляді діаграм, що відображають динаміку поведінки і логічну структуру системи . Наведені діаграми є інструментальним засобом аналітичної підтримки процесу формування вимог до інтелектуальних комп’ютерних систем навчання.Item Онтологическая модель архитектуры информационной системы на основе сервисного подхода(Національний університет «Запорізька політехніка», 2013) Евланов, М. В.; Євланов, М. В.; Ievlanov, M. V.RU: В статье рассмотрены современные представления понятия «архитектура», которые используются в ходе разработки информационных систем различного назначения. Рассмотрены особенности сервисного подхода к представлению информационной системы. Предложены уточненные понятия «архитектура ИТ-услуг» и «архитектура ИТ-сервисов». Разработаны визуальные модели взаимосвязи основных элементов, образующих понятия «сервисный подход к разработке информационной системы» и «архитектура информационной системы». UK: В статті розглянуто сучасні представлення терміну «архітектура», які використовуються під час розробки інформаційних систем різного призначення. Розглянуто особливості сервісного підходу до представлення інформаційної системи. Запропоновано уточнені терміни «архітектура ІТ-послуг» та «архітектура ІТ-сервісів». Розроблені візуальні моделі взаємозв’язків основних елементів, що утворюють терміни «сервісний підхід до розробки інформаційної системи» та «архітектура інформаційної системи». EN: The article describes the concept of modern ideas of «architecture», which are used in the development of information systems for different purposes. The features of the service approach to the representation of the information system are considered. Proposed refinement of the concept of «architecture of IT services» and «architecture of IT services». Visual models of the relationship major elements for the concepts «service approach to the development of information systems» and «information system architecture» are developed.Item R-peaks detection using wavelet technology(Національний університет «Запорізька політехніка», 2013) Dubrovin, V. I.; Tverdohleb, J. V.; Kharchenko, V. V.; Дубровін, Валерій Іванович; Твердохліб, Ю. В.; Харченко, В. В.EN: The given work presents the methodology of R-peaks detection in an electrocardiogram signal based on Discrete Wavelet Transformation. The optimal level decomposition of the detail coefficients can be determined by energy, frequency and cross-correlation analyses. The effectiveness of the proposed algorithm has been tested by using records obtained from the MIT/BIH Physionet arrhythmia database. UK: Дана робота присвячена методиці виявлення R-піків сигналу ЕКГ, заснованій на застосуванні дискретного вейвлет-перетворення. Вибір деталізуючих коефіцієнтів 4-го рівня розкладання кардиосигнала було зроблено на підставі результатів проведених енергетичного, частотного та кореляційного аналізів. Ефективність запропонованого алгоритму була перевірена з використанням записів з бази даних аритмій MIT-BIH Physionet.Item The evolving adaptive neural network for data processing with missing observations(Національний університет «Запорізька політехніка», 2013) Shafronenko, A.; Pliss, I.; Bodyanskiy, Ye.; Шафроненко, А.; Плісс, І.; Бодянський, Є.EN: The problem of computational intelligence systems synthesis in on-line mode, capable for processing stochastic signals with missing observations in the data is considered. An adaptive approach based on using of orthogonal polynomials is developed. UK: Розглянуто задачу синтеза еволюціонуючої в on-line режимі системи обчислювального інтелекту, здатної обробляти стохастичні сигнали, що містять пропуски в даних. Запропоновано адаптивний підхід, в основі якого полягає використання ортогональних поліномів.Item An attempt for 2-layer perceptron high performance in classifying shifted monochrome 60-by-80-images via training with pixel-distorted shifted images on the pattern of 26 alphabet letters(Національний університет «Запорізька політехніка», 2013) Romanuke, V. V.; Романюк, В. В.EN: Object classification problem is considered, where neocognitron and multilayer perceptron may be applied. As neocognitron, solving almost any classification problem, performs too slowly and expensively, then for recognizing shifted monochrome images there is attempted the 2-layer perceptron, being fast only for pixel-distorted monochrome images, though. Having assumed the original images set of 26 monochrome 60-by-80-images of the English alphabet letters, there is formulated the task to clear out whether the 2-layer perceptron is capable to ensure high performance in classifying shifted monochrome images. Thus it is disclosed that the 2-layer perceptron performs as the good classifier of shifted monochrome images, when in training its input is fed with training samples from shifted images, being pixel-distorted. For this, however, it may need more passes of training samples through the 2-layer perceptron, but nevertheless the total traintime will be shorter than for training the 2-layer perceptron with only pixel-distortion-free shifted monochrome images. UK: Розглядається задача об’єктної класифікації, де можуть застосовуватись неокогнітрон і багатошаровий персептрон. Оскільки неокогнітрон, розв’язуючи практично будь-яку задачу класифікації, працює занадто повільно і затратно, то для розпізнавання монохромних зображень зі зсувом пропонується випробувати двошаровий персептрон, хоча він є швидкодіючим тільки для монохромних зображень з піксельними спотвореннями. Запропонувавши набір оригінальних зображень з 26 монохромних зображень літер англійського алфавіту формату 60-на-80, формулюється задача вияснити, чи здатен двошаровий персептрон забезпечити високу продуктивність при класифікації монохромних зображень зі зсувом. Відповідно виявляється, що двошаровий персептрон працює як хороший класифікатор монохромних зображень зі зсувом, коли при навчанні на його вхід поступають навчальні вибірки зображень зі зсувом, пікселі яких спотворені. Для цього, однак, може знадобитись більше проходів навчальних вибірок через двошаровий персептрон, але тим не менше загальний час навчання буде меншим, ніж для навчання двошарового персептрону лише на монохромних зображеннях зі зсувом без піксельних спотворень.Item Fault tolerance of spacecraft orientation and stabilization system(Національний університет «Запорізька політехніка», 2013) Firsov, S. N.; Reznikova, O. V; Фірсов, С. М.; Резнікова, О. В.EN: Formed the structure of the orientation and stabilization system for ensuring its active fault tolerance. Parameterized types of failures of the system functional elements, characterized by changes in the properties of the conversion elements. Received diagnostic functional models for solving problems of detection, search the place and establish a class of failure for system. Developed models and methods of systematic approach to fault tolerance in the direction of the effective use of the signal, parametric and structural redundancies and selection of parrying tools. Performed experimental researches of the sample model of the automatic attitude control and stabilization the properties of active fault-tolerance in emergency modes of operation. UK: Сформована структура системи орієнтації та стабілізації, яка забезпечує її активну відмовостійкість. Параметризовані види відмов функціональних елементів системи, що характеризуються зміною властивостей перетворювальних елементів. Отримано діагностичні функціональні моделі для вирішення задач виявлення, пошуку місця та визначення класу відмови системи. Розроблено моделі і методи системного підходу до відмовостійкості з метою ефективного використання сигнальної, параметричної та структурної надлишковості та обрані інструменти парирування. Проведено експериментальні дослідження макетного зразка автоматичної системи орієнтації та стабілізації для дослідження властивостей активної відмовостійкості в аварійних режимах роботи.Item Определение ориентации элементарных составляющих моделей знаков, подлежащих автоматическому именованию на множестве атомарных элементов(Національний університет «Запорізька політехніка», 2013) Шевцов, Д. В.; Шевцов, Д. В.; Shevtsov, D. V.RU: Автоматическое моделирование, именование и опознавание знаков цифровых бинарных изображений произвольной природы является актуальной научно-практической задачей, находящей свое приложение во многих областях внедрения информационных технологий, в частности, при обработке и анализе электронных документов. Статья посвящена конструктивному определению структурных составляющих моделируемых изображений, прошедших этап утоньшения при предварительной обработке, и их свойств, которые позволят осуществлять автоматическое выявление указанных объектов с целью последующего формирования описания именуемых и распознаваемых знаков на дискретном множестве атомарных элементов. UK: Автоматичне моделювання, іменування та опізнавання знаків цифрових бінарних зображень довільної природи є актуальною науково-практичною задачею, яка знаходить своє використання в багатьох галузях впровадження інформаційних технологій, зокрема, при обробці й аналізі електронних документів. Стаття присвячена конструктивному визначенню структурних складових зображень, які модулюються після скелетизації при попередній обробці, та їх властивостей, які нададуть можливості здійснювати автоматичне виявлення вказаних об’єктів з метою наступного формування описів знаків, що іменуються та розпізнаються на дискретній множині атомарних елементів. EN: Arbitrary nature digital binary images signs automatic modeling, naming and recognition are actual scientific and practical problems, which are existing in many areas of information technologies application scopes, particularly in electronic documents processing and analyzing. This article is devoted to a constructive definition of images structure components, that are modeled after skeletonization during preprocessing, and their properties, which will give an opportunity to perform automatic detection of described objects in order to form description of future signs, which will be named and recognized on atomic elements discrete set.Item Использование технологий параллельных вычислений в методе конечных элементов(Національний університет «Запорізька політехніка», 2013) Чопоров, С. В.; Чопоров, С. В.; Choporov, S. V.RU: В работе рассмотрена проблема использования параллельных вычислений в методе конечных элементов. Рассмотрены особенности построения матрицы жесткости и решения полученной системы линейных уравнений на базе параллельных вычислений. Проведены вычислительные эксперименты, результаты которых использованы для анализа эффективности предложенных подходов. UK: В роботі розглянута проблема впровадження паралельних обчислень у метод скінченних елементів. Розглянуто особливості побудови матриці жорсткості та вирішення отриманої системи лінійних рівнянь на базі паралельних обчислень. Проведено обчислювальні експерименти, які використані для аналізу ефективності запропонованих підходів. EN: Nowadays engineers and researchers are faced with solving very complex problems in a mathematical modeling and design. Numerical analysis naturally finds applications in all fields of engineering and the physical sciences. The finite element method is a powerful tool for the numerical simulation of a wide range of problems. Implementation of the finite element method in CAD systems on the basis of modern computers allows researchers to solve large scale problems. The finite element method uses a discretization of a continuum domain into a mesh as the starting point. The discretization of complex domains may give large numbers of elements, thus increasing the requirements of computer memory and speed. Modern parallel computers use multiple processing elements simultaneously to solve a problem. Thus implementation of parallel computing into the finite element method is urgent direction of the research. In the finite element method for the numerical solution of partial differential equations, the stiffness matrix represents the system of linear equations that must be solved in order to ascertain an approximate solution to the differential equation. Therefore the article describes parallel algorithms for assembly of stiffness matrix and for solution of linear equations. Also this article contains two numerical experiments: 1) Dirichlet problem on the complex domain (gear); 2) Elasticity problem of three-layer shell. In the end of the article author compares the speed of a solution of these problems with one, two and four parallel cores and makes discussion about the effectiveness of parallel finite element processing.Item Estimation of market risk in Ukraine using VaR methodology(Національний університет «Запорізька політехніка», 2013) Trofymchuk, O. M.; Kozhukhivska, O. A.; Bidyuk, P. I.; Kozhukhivskyi, A. D.; Трофимчук, О. М.; Кожухівська, O. A.; Бідюк, П. І.; Кожухівський, А. Д.EN: The emergence of a market risk due to performing operations with currency can result in substantial financial losses. That is why such situations require carrying out of profound analysis and management of respective risks. The market risk of this kind is characterized with possible losses of financial resources due to incorrectly performed operations with currency. The paper considers the possibility of application of the VaR methodology to the bank currency portfolio using the following methods: delta-normal, as well as the methods of historical modeling and Monte-Carlo simulation. While performing the computing experiments actual data used from the currency market of Ukraine. Quite acceptable results of forecasting possible losses were received by making use of Monte-Carlo simulation that hypothetically can take into account possible variations of the market exchange rates. It was established that the risk forecasting errors appear only due to non-predictable abrupt changes of exchange rates. UK: В роботі розглядається можливість застосування методів оцінювання міри ризику VaR для банківського валютного портфеля з використанням таких методів: дельта-нормальний, історичний та імітаційного моделювання. Прийнятні за якістю результати прогнозування втрат отримано за методом Монте-Карло, який гіпотетично може враховувати можливі зміни курсів валют на ринку. Встановлено, що похибки прогнозів можливих втрат виникають лише за наявності непередбачуваних різких змін курсу валют.Item Розв’язок крайової задачі оптимального керування в критичному випадку(Національний університет «Запорізька політехніка», 2013) Панасенко, Є. В.; Panasenko, Y. V.UK: У статті розглянуто крайову задачу в критичному випадку, яка виникає в теорії оптимального керування для матричних диференціальних рівнянь. Знайдено умову розв’язності таких задач. Запропоновано підхід до знаходження її розв’язку за допомогою теорії псевдообернених матриць. EN: The article describes the boundary-value problem of the theory of optimal control for matrix differential equations in the critical case. This problem is urgent for wide range of applications like modeling of linear technological and economic processes. A problem of controlling movement is reduced to solutions of boundary-value problems of systems of ordinary differential equations of the first order. Solution of these tasks is very complex in case of control of systems in which the number of processes exceeds the amount of information about the initial state. The paper is devoted to finding conditions for solvability and construction solutions of boundary-value problems in critical case of the theory of motion control, in which the number of boundary conditions does not coincide with the number of unknowns in the system. The condition of solvability of such problems is found. Author describes the approach for solution to the problem with the help of theory of pseudoinverse matrices. In addition this approach is applicable to the problem of analytic construction of regulators and the optimal stabilization.Item Протокол сліпого електронного цифрового підпису на еліптичних кривих над скінченим векторним полем(Національний університет «Запорізька політехніка», 2013) Нікуліщев, Геннадій Ігорович; Nikulishchev, H. I.UK: У даній статті пропонується реалізація протоколу сліпого електронного цифрового підпису, що являє собою модифікацію стандарту ГОСТ Р 34.10-2001 на еліптичних кривих над скінченим векторним полем. Аналізується захищеність запропонованого протоколу за критерієм анонімності. EN: Digital signature schemes can fulfill an actual task of ensuring fairness and transparency of electronic election. However, existing standards and protocols need modification into blind signature and additional security check by the anonymity criterion. The author examines blind signature protocol provided by Russian scientists. It is proposed to improve scheme‘s efficiency by changing inner mathematics. Elliptic curves over vector finite field enable parallel processing in group operation and reduce integer range. These advantages are illustrated by computational example. Also, improved protocol investigation by the anonymity criterion is provided in the article. The author proves that mathematics change do not affect protocol security.Item Устойчивость решения задач оптимального проектирования систем с интервальными параметрами(Національний університет «Запорізька політехніка», 2013) Левин, В. И.; Левін, В. І.; Levin, V. I.RU: Рассмотрена задача оптимизации неполностью определенных (недетерминированных) функций, т.е. функций с параметрами, заданными лишь с точностью до интервала. Показано, что решение этой проблемы требует также рассмотрения задачи определения устойчивости оптимума к варьированию значений параметров функции. Предлагается метод нахождения оптимума функций и определения его устойчивости методами интервальной математики. UK: Розглянуто задачу оптимізації неповністю певних (недетермінованих) функцій, тобто функцій з параметрами, заданими лише з точністю до інтервалу. Показано, що вирішення цієї проблеми потребує також розгляду завдання визначення стійкості оптимуму до варіювання значень параметрів функції. Пропонується метод знаходження оптимуму функцій і визначення його стійкості методами інтервальної математики. EN: Our article considers the problem of optimization of incompletely specified functions, namely, functions which parameters are given within range of possible values. It is shown that solution of this problem also requires solving problem of determining stability of optimum of such functions to variation of values of their parameters. A method for obtaining such optimum of incompletely defined functions is presented. Method uses determination of problem. It allows to split original non-deterministic problem into two optimization problem of deterministic functions, which are solved separately. After that solutions are combined into one which is a solution of original problem. The article also provides a method for determining the stability of the optimum found of incompletely defined functions by methods of interval mathematics. We formulate 5 theorems determining the conditions for existence of optimum of incompletely defined function and its resistance to changing the function parameters. Algorithms for verifying the stability function are givenItem Оптимизация распределения объема заказа между несколькими поставщиками в тендере(Національний університет «Запорізька політехніка», 2013) Колпакова, Татьяна Алексеевна; Колпакова, Тетяна Олексіївна; Kolpakova, T. A.RU: Рассматривается проблема оптимального распределения объема заказа между несколькими поставщиками, участвующими в тендере. Предложен метод многокритериальной оптимизации распределения объема заказа между несколькими поставщиками в тендере, который учитывает относительные коэффициенты важности критериев, по которым производится оптимизация. UK: Розглядається проблема оптимального розподілу обсягу замовлення між декількома постачальниками, які беруть участь у тендері. Запропоновано метод багатокритеріальної оптимізації розподілу обсягу замовлення між декількома постачальниками в тендері, який враховує відносні коефіцієнти важливості критеріїв, за якими проводиться оптимізація. EN: The problem of optimal distribution of orders among multiple contractors participating in the tender is considered. During tendering when contract is prepared for signing, some additional requirements can appear. If the selected contractor can’t satisfy them, client should choose another contractor or organize one more tender. To avoid this situation client may want to split job among several contractors. A method for multi-objective optimization of distribution of orders among several contractors in the tender, which takes into account the relative importance of factors of optimization criteria is proposed.Item Исследование изменений энтропии и энергии на этапах декомпозиции сигнала(Національний університет «Запорізька політехніка», 2013) Дубровин, Валерий Иванович; Твердохлеб, Ю. В.; Дубровін, Валерій Іванович; Твердохліб, Ю. В.; Dubrovin, V. I.; Tverdohleb, J. V.RU: Проведено исследование поведения энтропии и энергии сигнала на этапах его декомпозиции. Предложен метод разделения исходного сигнала сложной формы на независимые составляющие с помощью математического аппарата вейвлет-преобразования и теории информации. UK: Проведено дослідження виявлення змін ентропії та енергії сигналу на етапах його декомпозиції. Запропоновано метод ділення сигналу складної форми на незалежні складові за допомогою математичного апарату вейвлет-перетворення та теорії інформації. EN: Research of changes of entropy and energy on signal decomposition is presented. Coifman’s method for the purpose for signal delineation was modified. The method of complex signal delineation based on wavelet transformation and information theory is proposed. The algorithm for the signal components separation is developed. The proposed method based on research of total entropy of both signal formed components. The first component is the reconstructed source signal after wavelet transformation on the current decomposition level in which the approximation coefficients must be equals to zero. The second component is the residue from the deduction of the source signal and the second component on the current decomposition level. The turning point of the total entropy curve denotes the most unstable system state in which the components can be identified. The most unstable system state is system state having zero increment of information. Entropy increments until the turning point and it decrease after. The sum of the sinusoids was used as test signal. The results of the method have high accuracy.Item Метод учета влияния системы менеджмента надежности предприятия при расчетной оценке показателей безотказности электронных средств(Національний університет «Запорізька політехніка», 2013) Артюхова, М. А.; Жаднов, В. В.; Полесский, С. Н.; Артюхова, М. А.; Жаднов, В. В.; Поліський, С. М.; Artyukhova, M. A.; Zhadnov, V. V.; Polesskiy, S. N.RU: В статье рассмотрены основные аспекты современного подхода к прогнозированию показателей безотказности электронных средств ответственного назначения. Показано, что при расчетной оценке интенсивности отказов таких изделий следует учитывать не только технические и программные средства, но и факторы, характеризующие систему менеджмента надежности предприятия. UK: У статті розглянуто основні аспекти сучасного підходу до прогнозування надійності електронних засобів відповідального призначення. Показано, що при розрахунковій оцінці інтенсивності відмов таких виробів слід враховувати не тільки технічні і програмні засоби, але фактори, що характеризують систему менеджменту надійності підприємства. EN: The current period of creation of the electronic equipment of a responsible and special purpose is characterized by universal introduction of the Quality Management Systems at the enterprises developers and producers of electronic equipment. Quality Management System and its component – Dependability Management System are aimed at providing the guaranteed level of indicators of quality (including and dependability indicators). In the reliability prediction method recommended by the Russian standards influence of procedures of Dependability Management System is considered with the help of «Coefficient Quality Production Equipment» (KA). This coefficient considers and reflects an average difference in failure rate of elements in the equipment developed and manufactured on requirements of various standard documentation (1 – for a complex of the standards «Moroz …» or 0,2 – for the situation «RK-…»). However, such approach to forecasting reliability prediction of electronic equipment at the early design stages, based on use of average statistical data rather approximate. It doesn’t consider neither features of Dependability Management System of the concrete enterprise, nor completeness of the Support Reliability Program when developing. Therefore more adequate approach to an assessment of value of the coefficient realized in methodology 217PlusTM is represented. According to this methodology when forecasting value of the coefficient are used not only statistical estimates, but also an expert assessment of Dependability Management System effectiveness during the developing and production of the equipment. The article discusses all the features of application of methodology 217PlusTM for an assessment of the coefficient : mathematical model of multiple-factor coefficient of quality of production, analysis of influence of its components on the general level and functional model of reliability prediction process.Item Дослідження масогабаритних і теплових характеристик герметичних блоків радіоелектронних апаратів(Національний університет «Запорізька політехніка», 2013) Шило, Галина Миколаївна; Сиротюк, Оксана Валентинівна; Савелло, А. Є.; Лопатка, Ю. А.; Арєшкін, Є. К.; Гапоненко, Микола Прокопович; Shilo, G. M.; Sirotuk, O. V.; Savello, А. E.; Lopatka, J. A.; Areshkin, E. K.; Gaponenko, M. P.UK: Досліджено залежність об’єму, маси та масогабариту від кількості плат і відстані між ними у герметичних блоках радіоелектронних апаратів. Показано, що оптимізація несучих конструкцій може зменшити масогабаритні показники у 1,5–3 рази порівняно з одноплатною компоновкою. Аналізується залежність максимальної температури на кожній платі від відстаней між платами. Найгірший тепловий режим спостерігається при відстані між платами 2–5 мм. Моделювання теплових режимів здійснювалось програмними засобами інженерного аналізу. EN: The dependence of volume, mass and size on the number of boards and the distance between them in sealed unit of electronic devices is researched. Mass and size characteristics are calculated excluding the mass of electronic components, wiring harness and connectors. During packaging the total mounting of electronic components does not change. Dimensions of each board are included the rock areas and guard bend at the board boundaries. The square boards are used to reduce the volume. Overall dimensions of the unit are given as the family of block volume dependencies on the number of boards if range of board-distances is equal from 5 to 40 mm. The minimum volume of the unit is provided from 5–7 boards. Then the volume is reduced by 1,5–2 times in comparison with one-board units. The mass of the block is reduced 1,5–3 times under the same conditions. The dependence of maximal temperature on each board from distance between the boards is analyzed. The temperature mode is the worst if distances between the boards are from 2 to 5 mm. The research of the mass, size and thermal characteristics has allowed to reduce design errors and to improve the quality of the electronic device design simultaneously.